Incorrect air/fuel mixture (14.7:1) from EVAP Canister Purge Regulator Valve resulting in no detectable change in Oxygen Sensor signal
What to check (live data)
Mass Air Flow Sensor signal change when EVAP Canister Purge Regulator Valve opens
Oxygen Sensor signal change when EVAP Canister Purge Regulator Valve opens
Air/fuel mixture ratio (correct range stated as 14.7:1)
Parts often involved in P0441
EVAP Canister Purge Regulator Valve
Mass Air Flow Sensor
Oxygen Sensor
Don't replace parts until the root cause is confirmed — many of these codes are caused by wiring, a connector or an upstream fault, not the part itself.
Get the confirmed root cause for P0441 — on YOUR vehicle
A code is a symptom, not a diagnosis. AutoDX Pro cross-checks several
independent assessments, pinpoints the actual root cause, gives you the
exact tests to confirm it, and shows the parts — only after the cause is
confirmed. Reads your scan-tool photo and decodes your VIN with open
recalls.
P0441 is a diagnostic trouble code: Evaporative Emission System Incorrect Purge Flow.
What are the common causes of P0441 on an Audi?
Common causes include: EVAP Canister Purge Regulator Valve malfunction causing incorrect purge flow, Incorrect air/fuel mixture (14.7:1) from EVAP Canister Purge Regulator Valve resulting in no detectable change in Oxygen Sensor signal. The exact cause depends on the vehicle — confirm it before replacing parts.
Can I keep driving an Audi with P0441?
It depends on the fault and your symptoms. Some causes are minor, others can damage components or affect safety. Get the root cause confirmed before deciding.
How do I fix P0441 on an Audi?
Confirm the actual root cause with targeted tests first, then replace only the part that's at fault. AutoDX Pro gives you the root cause, the exact tests, and the parts for P0441 on your specific Audi.