Transmission fluid temperature threshold: 145°C (293°F) — triggers clutch pressure cutoff and further engine performance reduction
Electronics temperature threshold: 160°C — triggers pump shutdown (in applicable pump-related systems)
Substitute value: engine temperature signal used when G93 fails (multitronic 01J) or offset value from J217 temperature sensor (0BW hybrid)
Parts often involved in P0711
Transmission Fluid Temperature Sensor G93 (integrated into mechatronics/Transmission Control Module J217)
Mechatronic module (as G93 is an integral part of it)
Transmission Control Module J217 (G93 is integrated into its electronics/circuit board)
Don't replace parts until the root cause is confirmed — many of these codes are caused by wiring, a connector or an upstream fault, not the part itself.
Get the confirmed root cause for P0711 — on YOUR vehicle
A code is a symptom, not a diagnosis. AutoDX Pro cross-checks several
independent assessments, pinpoints the actual root cause, gives you the
exact tests to confirm it, and shows the parts — only after the cause is
confirmed. Reads your scan-tool photo and decodes your VIN with open
recalls.
P0711 is a diagnostic trouble code: Transmission Fluid Temperature Sensor 'A' Circuit Range/Performance.
What are the common causes of P0711 on an Audi?
Common causes include: Sensor G93 failure causing substitute value to be used (engine temperature or offset value from J217 sensor), Excessive transmission fluid temperature exceeding sensor range (above 138°C/280°F or 145°C/293°F), Sensor integrated into mechatronics/control module failing to accurately reflect transmission fluid temperature. The exact cause depends on the vehicle — confirm it before replacing parts.
Can I keep driving an Audi with P0711?
It depends on the fault and your symptoms. Some causes are minor, others can damage components or affect safety. Get the root cause confirmed before deciding.
How do I fix P0711 on an Audi?
Confirm the actual root cause with targeted tests first, then replace only the part that's at fault. AutoDX Pro gives you the root cause, the exact tests, and the parts for P0711 on your specific Audi.